Initial Inspection
Identify any potential issues or concerns that may need to be addressed during the deep cleaning process
Filters, Grill & Return Air Inlet
Inspection, clean and wipe down each air supply outlet to remove any dust, debris, or other contaminants using high-quality grade chemicals to disinfect and sanitise.
Hydro Pressure Wash
Hydro wash air filters and grills to remove dirt, debris, contaminants, and chemicals that can accumulate in air filters and grills over time.
Sanitise, Disinfect and Deodorise
Anti-fungal/bacterial/microbial/virus inhibitor applied to reduce the risk of illness caused by airborne pathogens. A fresh scented deodoriser applied to neutralise odours.
Re-AssemblyReposition the air filter and grill back to their original location
Fogging
Dispersed a fine mist using approved specialised disinfectant into the AC unit to kill bacteria, viruses, and other microorganisms. The fine mist can penetrate into small crevices, ducts, and other hard-to-reach areas, ensuring that all surfaces are properly disinfected. This means that even areas that are not visible or accessible can be cleaned and disinfected effectively, helping to reduce the risk of contamination and the spread of harmful microorganisms
External Condenser
Chemically treat and hydro-wash the coils, case cover, condenser coils, fan and grill to break down any harmful contaminants, dirt, debris and potential hazards such as bugs and critters to increase air flow and efficiency.
ADD ON OPTIONS $59 New Filter
Recommendation: Change filters every 12 months to maintain optimal performance, improve air quality, and extend your system’s lifespan.
Important note: Our services do NOT include full air duct cleaning, as this requires specialised equipment and is not reflected in our pricing.
Initial Inspection
Identify any potential issues or concerns that may need to be addressed during the deep cleaning process. Remove Treat the evaporator coil hydro wash and disinfect and flush all drains
Duct Inspections
A quick look at the ducts to ensure satisfactory conditions enables us to fix minor tears.
Evaporator Coils
Remove panel to expose evaporator coil. Apply a commercial-grade chemical to the evaporator coils to break down contaminants, including mould, germs, and bacteria.Hydro Pressure wash the evaporator coils, removing dirt, debris, and other contaminants. Finish the process by flushing the drain to ensure the removal of any remaining dirt, debris, and chemicals.
Anti-fungal/bacterial/microbial/virus inhibitor applied to sanitise and disinfect
Filters, Grill & Return Air Inlet
Return Air Filters and Grill (removed) and Return Air Inlet chemically treated to eliminate and break down build-up of harmful contaminants, including mould, germs, bacteria, viruses, dust and other microorganisms
Air Supply OutletsInspection, clean and wipe down each air supply outlet to remove any dust, debris, or other contaminants using high-quality grade chemicals to disinfect and sanitise.
Hydro Pressure Wash
Hydro wash air filters and grills to remove dirt, debris, contaminants, and chemicals that can accumulate in your air filters and grills over time
Sanitise, Disinfect and Deodorise
Anti-fungal/bacterial/microbial/virus inhibitor applied to reduce the risk of illness caused by airborne pathogens. A fresh scented deodoriser applied to neutralise odours
Re-Assembly
Reposition the air filter and grill back to their original location.
Fogging
Dispersed a fine mist using approved specialised disinfectant into the AC unit to kill bacteria, viruses, and other microorganisms. The fine mist can penetrate into small crevices, ducts, and other hard-to-reach areas, ensuring that all surfaces are properly disinfected. This means that even areas that are not visible or accessible can be cleaned and disinfected effectively, helping to reduce the risk of contamination and the spread of harmful microorganisms
External Condenser
Chemically treat and hydro-wash case, condenser coils, fan and grill to break down any harmful contaminants, dirt, debris and potential hazards such as bugs and critters to increase air flow and efficiency.
ADD ON OPTIONS $59 New Filter
Recommendation: Change filters every 12 months to maintain optimal performance, improve air quality, and extend your system’s lifespan.
Important note:
Our services do NOT include
full air duct cleaning, as this requires specialised equipment and is not reflected in our pricing.
Full Deep Clean
-Internal and external clean (indoor unit & condenser)
-Removal of Fan Barrel and Drain Pan
-Fan barrel, coils, drain pan, and filters cleaned
-Mould and bacteria treatment
-External Condenser Deep Clean for accessible units
Full System Check
-Airflow and temperature check
-Refrigerant pressure test
-Electrical connections check
-Inspection for leaks, damage, or wear
-Drain pipe flow test
Preventative Maintenance
-Identifying early signs of issues (e.g. minor leaks, loose parts, rust)
-Tightening of screws and securing panels
-Cleaning of external condenser fins
-External Condenser Pipe Examination and Patch where required
-Recommendations for part replacement or regassing (if required)
-Customer report and service checklist
Optional Add-ons
Regassing Minor part replacements
-Regassing (if required, quoted separately)
-Minor part replacements (e.g. drain caps, filter covers)
Initial Inspection
Identify any potential issues or concerns that may need to be addressed during the deep cleaning process
Filters, Grill & Return Air Inlet
Inspection, clean and wipe down each air supply outlet to remove any dust, debris, or other contaminants using high-quality grade chemicals to disinfect and sanitise.
Hydro Pressure Wash
Hydro wash air filters and grills to remove dirt, debris, contaminants, and chemicals that can accumulate in air filters and grills over time.
Sanitise, Disinfect and Deodorise
Anti-fungal/bacterial/microbial/virus inhibitor applied to reduce the risk of illness caused by airborne pathogens. A fresh scented deodoriser applied to neutralise odours.
Re-AssemblyReposition the air filter and grill back to their original location
Fogging
Dispersed a fine mist using approved specialised disinfectant into the AC unit to kill bacteria, viruses, and other microorganisms. The fine mist can penetrate into small crevices, ducts, and other hard-to-reach areas, ensuring that all surfaces are properly disinfected. This means that even areas that are not visible or accessible can be cleaned and disinfected effectively, helping to reduce the risk of contamination and the spread of harmful microorganisms
External Condenser
Chemically treat and hydro-wash the coils, case cover, condenser coils, fan and grill to break down any harmful contaminants, dirt, debris and potential hazards such as bugs and critters to increase air flow and efficiency.
ADD ON OPTIONS $59 New Filter
Recommendation: Change filters every 12 months to maintain optimal performance, improve air quality, and extend your system’s lifespan.
Important note: Our services do NOT include full air duct cleaning, as this requires specialised equipment and is not reflected in our pricing.
Initial Inspection
Identify any potential issues or concerns that may need to be addressed during the deep cleaning process. Remove Treat the evaporator coil hydro wash and disinfect and flush all drains
Duct Inspections
A quick look at the ducts to ensure satisfactory conditions enables us to fix minor tears.
Evaporator Coils
Remove panel to expose evaporator coil. Apply a commercial-grade chemical to the evaporator coils to break down contaminants, including mould, germs, and bacteria.Hydro Pressure wash the evaporator coils, removing dirt, debris, and other contaminants. Finish the process by flushing the drain to ensure the removal of any remaining dirt, debris, and chemicals.
Anti-fungal/bacterial/microbial/virus inhibitor applied to sanitise and disinfect
Filters, Grill & Return Air Inlet
Return Air Filters and Grill (removed) and Return Air Inlet chemically treated to eliminate and break down build-up of harmful contaminants, including mould, germs, bacteria, viruses, dust and other microorganisms
Air Supply OutletsInspection, clean and wipe down each air supply outlet to remove any dust, debris, or other contaminants using high-quality grade chemicals to disinfect and sanitise.
Hydro Pressure Wash
Hydro wash air filters and grills to remove dirt, debris, contaminants, and chemicals that can accumulate in your air filters and grills over time
Sanitise, Disinfect and Deodorise
Anti-fungal/bacterial/microbial/virus inhibitor applied to reduce the risk of illness caused by airborne pathogens. A fresh scented deodoriser applied to neutralise odours
Re-Assembly
Reposition the air filter and grill back to their original location.
Fogging
Dispersed a fine mist using approved specialised disinfectant into the AC unit to kill bacteria, viruses, and other microorganisms. The fine mist can penetrate into small crevices, ducts, and other hard-to-reach areas, ensuring that all surfaces are properly disinfected. This means that even areas that are not visible or accessible can be cleaned and disinfected effectively, helping to reduce the risk of contamination and the spread of harmful microorganisms
External Condenser
Chemically treat and hydro-wash case, condenser coils, fan and grill to break down any harmful contaminants, dirt, debris and potential hazards such as bugs and critters to increase air flow and efficiency.
ADD ON OPTIONS $59 New Filter
Recommendation: Change filters every 12 months to maintain optimal performance, improve air quality, and extend your system’s lifespan.
Important note:
Our services do NOT include
full air duct cleaning, as this requires specialised equipment and is not reflected in our pricing.