Chrome-Plated Metal Tee & Elbow Fitting by Keeney

Recommended installation procedure: 1. Close the water supply valve at the faucet. 2. Remove the old Tee and connection piece. 3. Remove nuts A and D and washers B and C from the new Tee and connection piece. 4. Place the nuts and washers on the drain tubes leading to the Tee as shown. 5. Place nut and washer J on the Tee. 6. Position the Tee. Tighten the nuts by hand. Run water to check for leaks. For complete central drain outlet installation: 1. Acquire two drain tubes. 2. Measure the distance between W and X and Y and Z, and cut the drain tubes to the desired length with a hacksaw. 3. Remove nuts and washers E, F, G, and H from the new drain tube and place them on the collector connection piece as shown. 4. Assemble the Tee and connection piece according to the preceding instructions. 5. Position the entire central drain outlet system and tighten the nuts securely. Run water to check for leaks.

• Apply thread seal tape to drain threads before securing nuts
• Use a cloth to safeguard chrome finish on nuts while tightening with a pipe wrench